Beko CDA 664 F Průvodce řešením problémů stáhnout pdf (Strana 22)

22 | BEKO TECHNOLOGIES GMBH

8.3 Alarm connection details

To enable the alarm facility it is recommended that a suitable cable is brought into the

controller via the rear panel with a grommet. An external power source is required.:

1. Connect the switching pole of an externally powered alarm device to terminals 1 and

2 of alarm DIN connector.

2. With the power removed from the dryer and the alarm lead wired as described in 1

above, remove the cover from the DIN connection marked ‘Alarm’ and connect the

wired DIN connector ensuring the seal and screw are fitted.

Alarm relay rating 3 Amp Max 28 VDC

Alarm connection type Hirschmann GDS 207

industrial standard DIN

connector or equivalent

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Žádné komentáře

Beko CDA 664 F Průvodce řešením problémů Strana 22